Technical Data
| Description | Value |
|---|---|
| Dimensions | approx. 300 mm x 280 mm x 115 mm |
| Weight | 10 kg |
| Voltage | 220 – 240 VAC |
| Frequency | 50 Hz |
| Fuse rating | 4,0 A |
| Secondary voltage | 24 VAC |
| Maximum short-term heating power | 500 W |
| Medium power | 2 x 160 W |
| Protection class | I |
| Admissible ambient temperature | 0 – 40 °C |
| Temperature range (continuous) | 150 – 450 °C (50 – 550°C i-TOOL AIR S) |
| Regulating fluctuations in idle state | < ± 2 °C |
| Ohmic resistance between soldering tip and ground | < 2 Ohm |
| Leakage voltage soldering tip to ground | < 2 mV eff |
| Potential equalization | 4 mm |
| Miscellaneous | |
| Air supply | internal supply, air flow up to 20 l/min, vacuum up to 700 mbar |
| Front-side interfaces | 2 x micro SD card |
| Back-side interfaces | Ersa solder fume extraction, IRHP 100 heating plate, ready signal, standby signal, USB 2.0, 4 mm potential equalization bushing |
| Control system | SENSOTRONIC (PID characteristic) |
| Display | 2 LC displays, blue |
| 2 m PVC supply cable with appliance socket | |
| Single-button operation via incremental encoder (i-OP) | |
| Antistatic surface, especially suitable for use in ESD areas. | |
| According to MIL-SPEC/ESA standards | |
| VDE and EMV tested | |
| Conformity | CE |
| 4 tools can be operated simultaneously | |
| Connectable soldering and desoldering tools: i-TOOL, i-TOOL AIR S, CHIP TOOL, CHIP TOOL VARIO, X-TOOL, TECH TOOL, POWER TOOL, MICRO TOOL, i-SET TOOL | |